|
Hartford
Standard Portable Registers
High Impact
Plastic Portable Registers — No. 1 and No. 2 Sizes
Made of high
impact plastic, these portable registers are easy to operate. Pen
or pencil inserted in the pin hole advances form for easy removal.
The next form is then in position for recording the next transaction.
File copies are held by a spring tab in the bottom compartment.
Exact form
size must be provided with your order.
| Part
Number |
Description |
Master
Pack |
| EZ1SC |
Size #1
for sheet carbon |
40 |
| EZ1CL |
Size #1
for carbonless |
40 |
| EZ2SC |
Size #2
for sheet carbon |
24 |
| EZ2CL |
Size #2
for carbonless |
24 |
- Designed
for conventional 2-hole punched forms. Holes must be 3/8”
dia., spaced 3/8" from top of form and 2-3/4" center
to center.
- Register
holds 75 sets of 3-part forms.
- Size No.
1 sheet carbon is 4-5/16" wide up to 8" length.
- Size No.
2 sheet carbon is 5-1/2" wide up to 9" length.
- Size No.
1 carbonless form is 4" wide up to 6-1/4" length.
- Size No.
2 carbonless form is 5-1/2" wide up to 8-1/2" length.
- Each register
is packed in an individual carton.
Steel Portable
Registers — No. 60 Series
A knob on the
side of these registers ejects a portion of the form for easy removal.
This action automatically slides open a storage tray for the copies
to be filed and the continuous form advances manually until the
next form locks into position on the punch hole pins. The used forms
are then torn off at the perforation line. The automatic storage
tray function can be disarmed if not desired.
Exact form
size, and sample forms (for testing purposes) must be provided with
your order.
| Part
Number |
Description |
Master
Pack |
| 60#1 |
carbon,
form size 4-5/16"W x 8"L |
10 |
| 60#1S |
carbon,
form size 4"W x 6-1/2"L |
10 |
| 60#1CL |
carbonless,
form size 4-5/16"W x 6-1/2"L |
10 |
| 60#1ASCL |
carbonl.ess,
form size 4"W x 6-1/2"L |
10 |
| 60#1BSCL |
carbonless,
form size 4-5/16"W x 7"L |
10 |
| 60#1CSCL |
carbonless,
form size 4-5/16"W x 7"L |
10 |
| 60#2 |
carbon,
form size 5-1/2"W x 8-1/2"L |
10 |
| 60#12CL |
carbonless,
form size 5-1/2"W x 8-1/2"L |
10 |
- Standard
hole size is 3/8" dia.
- Distance
between holes is always 2-3/4" from center to center.
- Standard
tear-off dimension is 3/8" from top of holes to top of form.
Additional tear-off dimension is 3/8" from top of holes to
top of form.
- Standard
carbon roll is 5-1/2" long for No. 1 size and 7-1/2"
long for No. 2 size. Carbon roll diameter is 1" maximum.
- Case cover
overlaps edge of form by 5/32" on each edge; allow for this
in printing design or form.
- Design standard
form for no writing on top 1-1/8" of form which is covered
by lid.
- Register
holds 100 sets of 3-part forms.
- Each register
is packed in an individual carton.
For
product and sales information contact:
Russell Broady,
President/Owner
direct: 502.741.0117
fax: 502.722.8756
email: hartfordstandard@aol.com
|
